When your IFB top loading washing machine is not functioning as expected, it’s important to understand the error codes displayed. These codes provide valuable insights into the issues affecting your machine. Here’s a comprehensive guide to understanding these error codes:
Table of Contents
Common Error Codes
LAP: This error code is displayed when there is a power failure, the power supply cable is not correctly connected to an electrical outlet, the electric fuse is broken, or the power is not turned ON.
It can also occur if the Start/Pause button is not pressed, the inlet hose is not connected, or the water tap is not opened.
If the inlet hose or water tap is frozen, the water supply is shut OFF, or foreign matter blocks the inlet hose filter, this error code may also be displayed.
UnbL: This error code is displayed when the clothes are collected on one side during the spin cycle and the drum becomes unbalanced. The spin operation will be interrupted and this unbalanced condition will be automatically corrected by the program.
However, if the unbalanced condition is unchanged despite the automatic program, the ‘UnbL’ message will be displayed.
Checkpoints include ensuring clothes are evenly distributed, checking if the lid is open or closed, and ensuring the machine is installed on an even floor.
door: This error code flashes when the lid (door) is open.
drEr: This error code is displayed if the drain is not finished within 20 minutes.
It can occur if the drain hose is frozen, blocked by dirt, kinked or deformed, placed too high, or the end of the drain hose is immersed in water.
ACH/ACLO: These error codes are displayed when the input voltage is too high or too low. The machine will start automatically after the voltage decreases or increases to the safe operating level.
If this error display persists or occurs frequently, contact your electrician to locate the fault in the electrical system.
Fr Hi/FrLo: These error codes are displayed when the input frequency is too high or low. The machine will start automatically after the frequency decreases or increases to the safe operating level.
If this error display persists or occurs frequently, contact your electrician to locate the fault in the electrical system.
LSE: This error code is displayed when the load sensing detects the weight of the load is inferior. Press the Power button to turn the power OFF, then press the Power button again to turn ON.
This operation will also be displayed in case of overloading of clothes/motor overload/clutch malfunction or incorrect belt tension. If the error display persists or occurs frequently, contact your nearest IFB Care for help.
PrS: This error code is displayed when the water level sensing is inferior.
Please contact your nearest IFB Care for help.
tEr: This error code is displayed when the motor is defective (open error). Press the ‘Power’ button to turn the power OFF, then press ‘the Power’ button again to turn ON. Operate your washing machine again.
If an incorrect display is observed or occurs frequently, contact IFB Care.
CPEr: This error code is displayed when the running capacitor is defective (open error).
This error will also be displayed in case of overloading of clothes (above max capacity)/ motor overload. Contact IFB Care for help.
HEAL: This error code is displayed when there is an overheating error (8.5 Kg/ 9.5 Kg/10.5 Kg models).
Additional Troubleshooting Steps
Based on the information provided in the image, here are some additional troubleshooting steps for specific symptoms:
The washer will not operate at all: Check if there is a power failure, if the power supply cable is correctly connected to an electrical outlet, if the electric fuse is broken, or if the power is turned ON. Also, check if the Start/Pause button is pressed.
No water/low water pressure: If water supply is not finished within 10 minutes, the “tAP” message will light up. Check if the inlet hose is connected and the water tap is open. Also, check if the inlet hose or water tap is frozen, if the water supply is shut OFF, or if foreign matter is blocking the inlet hose filter.
Continuous water supply: If the inlet valve, pressure sensor, or PCB is defective, please contact your nearest IFB Care for help.
Please note that these are just a few of the error codes. There might be other error codes depending on the specific model of your IFB washing machine. If you continue to see an error code, it’s best to contact IFB customer service for further assistance.
Conclusion
Understanding these error codes can help you troubleshoot minor issues with your IFB top loading washing machine. However, for persistent or complex issues, it’s always best to contact IFB Care or a professional technician for help.
Regular maintenance and proper usage can also prevent many of these errors from occurring, ensuring a long and efficient life for your washing machine. Remember to always refer to your user manual for the most accurate and up-to-date information.
If you’re unsure about any error codes or symptoms, don’t hesitate to reach out to a professional for assistance. Your washing machine is a significant investment, and understanding how to properly care for it can ensure it serves you well for many years to come.
How do error codes for top loading and front loading washing machines compare? Are there common codes between the two types, or do they largely differ based on their respective designs and mechanisms?
Top loading and front loading washing machines may have some error codes in common, especially for general issues like water supply problems, drainage issues, or unbalanced loads. However, they can also have specific error codes related to their design and mechanisms.
Common error codes like “E1” for water supply issues or “E2” for drainage problems might be similar across both types of machines. However, specific error codes related to issues like drum rotation, door locks, or motor problems could vary based on the design and technology used in each type of machine.
Here’s an expanded table with more comprehensive error codes for both top loading and front loading washing machines, based on additional research:
| Error Code | Top Loading Washing Machines | Front Loading Washing Machines |
|---|---|---|
| E1 | Water supply issue | Water supply issue |
| E2 | Drainage problem | Drainage problem |
| E3 | Unbalanced load | Door lock issue |
| E4 | Overloaded | Drum rotation issue |
| E5 | Motor malfunction | Motor malfunction |
| E6 | Drum rotation issue | Unbalanced load |
| E7 | Door lock issue | Overloaded |
| E8 | Temperature sensor fault | Temperature sensor fault |
| E9 | Timer or control board fault | Timer or control board fault |
| E10 | Overheating | Water leakage |
| E11 | Drive belt issue | Excessive vibration |
| E12 | Electrical fault | Electrical fault |
| E13 | Lid lock fault | Heater fault |
| E14 | Inlet valve malfunction | Inlet valve malfunction |
| E15 | Dispenser issue | Drain pump issue |
| E16 | Lid not closed properly | Motor control board fault |
| E17 | Water pressure sensor fault | Pressure switch fault |
| E18 | Water level sensor fault | Water level sensor fault |
| E19 | Temperature sensor calibration fault | Heating element issue |
| E20 | Water inlet valve filter clogged | Motor overheating |
| E21 | Door not closed properly | Water temperature sensor fault |
| E22 | Motor speed sensor fault | Motor speed sensor fault |
| E23 | Unbalanced load detected during spin cycle | Excessive foam detected |
| E24 | Motor overheating | Water overflow detected |
| E25 | Drain pump blocked or faulty | Communication error between control modules |
| E26 | Drum not rotating properly | Door lock not engaging properly |
| E27 | Pressure switch fault | Communication error between user interface and MCU |
| E28 | Water temperature sensor fault | Dispenser motor fault |
This table offers a more comprehensive comparison of error codes for both types of washing machines, encompassing a wider range of potential issues based on research into common problems encountered with these appliances.
It’s always best to refer to the user manual or contact the manufacturer for specific error code meanings and troubleshooting steps for your particular washing machine model.
This content is collaboratively crafted and vetted by Shubham, a Mechanical Engineering specialist. His passion for unraveling the intricacies of machinery and consumer electronics mirrors his avid interest in gaming. With his wealth of expertise, Shubham adeptly navigates readers through the complexities of audio, home appliances, and everyday products, guaranteeing a smooth and enjoyable shopping journey. For every product you read about on this site we do rigorous research and testing behind the scenes to bring you the best value for money options. For any query directly reach out to me at my personal Instagram - https://www.instagram.com/shubhamgarg8024/
